As for the brake disc, the old driver is naturally too familiar with it: 6-70,000 kilometers to change the brake disc. The time here is the time to completely replace it, but many people do not know the daily maintenance method of the brake disc. This article will talk to you.
First of all, the products for maintaining brake discs mainly include: spray brake system and parts cleaning agent, brake disc high temperature protection agent, brake guide pin and slave pump lubricant, brake wheel lubricant protection agent and daily use sandpaper.
The main maintenance items are: high temperature protection of brake pads, lubrication and maintenance of brake sub-pumps, anti-rust lubrication of tire screws, contact surfaces of brake disc rings, etc. Of course, there is also the replacement of brake oil (the topic of brake oil will be introduced next time. This article mainly talks about the maintenance methods of related equipment)
The main maintenance steps are as follows:
Step 1: Remove the wheels, brake pads and guide pins to be serviced.
Step 2: Clean the brake discs, brake hubs and the back of the brake pads with the spray brake system and parts cleaner, and air dry naturally.
Step 3: Sandpaper the front of the brake pads and the rusted part of the brake hub.
Step 4: Apply the brake disc high temperature protective agent evenly on the back of the brake shoe.
Step 5: Apply brake guide pin and driven cylinder lubricant to brake guide pin and driven cylinder shaft.
Step 6: Apply brake hub lubricating protector to the surface of the brake hub.
Step 7: When complete, restore the braking system and make sure the brakes are working properly during practice runs.
This maintenance method is very simple, and you can do it yourself at home. In this way, you save a lot of maintenance costs and working time for going to the 4S store for inspection! Why not do it?
There is a lot of knowledge about brake discs that will continue to be shared with you in the future.
Post time: Aug-31-2023
